Dolby Digital Cinema Power Maintenance Recommendations

Dolby Digital Cinema Power Maintenance Recommendations v1 1

Dolby Labs has issued a bulletin regarding the long term shutdown of their cinema equipment.  The Dolby bulletin is here:

    • Related Articles

    • Dolby DSS-200 Power Switch for Hard Reboot

      The Dolby DSS digital cinema server was designed deliberately without a front panel power switch.  This was done by design to prevent accidental turn-off during a presentation.  There are times, however, when a full power cycle is needed to clear a ...

    • Christie - Temporary Suspension of your theatre Recommendations

      The following recommendations have been provided by Christie for preparing and maintaining your projection booth for an extended shutdown. While theatres are currently suspended from operation, there are a few recommendations we suggest you take to ...

    • Doremi Maintenance Program Notification Pop Up

      Skip to Main Content Doremi Maintenance Program Notification Pop Up Feb 18, 2021•Knowledge Question This article applies to DCP2000, DCP-2K4, ShowVault, IMS1000, IMS2000 and IMS3000. What is the Maintenance Program notification pop-up regarding? ...

    • Dolby/Doremi - How to Test playback

      Here's a training video for the Dolby/Doremi digital cinema server on how to test playback. ​

    • Dolby/Doremi Server Date reset to 1900's

      There is a known bug in the Security Manager software of certain Doremi/Dolby server models. This bug affects DCP-2000, ShowVault, IMS1000 and IMS2000 servers and some of their variants. Dolby refers to this bug as the Y2K24 bug as what it does is ...