Barco Error Code - 5830: “ti-link-decryptor - no communication” (Error)

This problem is caused by the TI Link Decryptor, better known as the Enigma board.  When using a projector with a "traditional" type of server (as opposed to an IMB/IMS type server), the signal coming from the external server is encrypted and decrypted by the "link decryptor" (enigma) within the projector.  The security certificate within the link decryptor is maintained by a battery that is recharged in normal use.  If the projector is left powered down for a long period of time the battery loses its charge and the certificate is lost.  This also can happen as the board ages.  After 5+ years of operation the battery may stop taking a charge.  We've seen this happen as early as 3 years.  In any case the certificate is lost and the link decryptor must be replaced.

​

• Related Articles

• Barco Series 2 Projectors will now be provided with ICP-D Instead of TI ICP - InfoT1501

  Barco service bulletin Serial Number : 1501 Date : 2021-01-26 Product : All Digital cinema series 2 Models Priority Code* : D ”Must” modification, Barco will provide the necessary components to perform this modification at no charge. ...

• Lamp Installation Barco digital cinema projector (DP1200, DP1500 & DP2000)

  The attached link will take you to a video provided by Barco detailing the changing of a lamp in the above listed digital cinema projectors. Lamp Changing in the Barco DP1200, DP1500, DP2000

• InfoT1501 Series 2 projector will now be provided with Barco ICP-D instead of TI ICP

  Barco service bulletin Serial Number : 1501 Date : 2021-01-26 Product : All Digital cinema series 2 Models Priority Code* : D ”Must” modification, Barco will provide the necessary components to perform this modification at no charge. Improves the ...

• NEC Series 2 - 4xx error

  This problem is caused by the TI Link Decryptor, better known as the Enigma board.  When using a projector with a "traditional" type of server (as opposed to an IMB/IMS type server), the signal coming from the external server is encrypted and ...

• Creating cues for a JSD60/JSD100 in a Barco ICMP

  Cues for the Barco server are created through the Barco Communicator, not the web GUI. To get to the server set-up, use the following: connect the communicator using the projector's IP, not the server's IP. Upgrade the login from DEFAULT (user) to ...