Christie ERROR: LD Log Space Is Running Low
This error occurs when the security log in the projector's enigma (legacy) board is near capacity. The enigma board is only used with older, external servers and is not used with IMB servers. If this message appears in a system that has an IMB type server installed, it means that the projector is still looking for confirmation from the enigma. In this case, the projector needs to be told that there is no enigma board in use. Use the following procedure:
1. Log into the projector using the SERVICE credentials.
2. From the MENU, navigate to ADMINISTRATOR SETUP -> CONTENT DEVICES CONFIGURATION.
3. Uncheck the box LD INSTALLED.
4. Reboot the projector
Related Articles
Christie - Temporary Suspension of your theatre Recommendations
The following recommendations have been provided by Christie for preparing and maintaining your projection booth for an extended shutdown. While theatres are currently suspended from operation, there are a few recommendations we suggest you take to ...Lamp Installation Christie Solaria One - Solaria One + - CP2210 - CP-2215
Here is a link to a video provided by Christie Digital that illustrates the lamp changing procedure for Solaria One/Solaria One Plus projectors. Christie Digital video for the Solaria One/One PlusChristie Touch Panel Controller displays Windows XP desktop
The touch panel controller (TPC) on Christie Series II projectors runs on a Windows XP Embedded operating system. The older, Series I projectors ran under a Windows CE Embedded operating system. Under normal operation, the operating system is ...Christie TCP Battery Replacement
The attached document discusses the replacement of the battery on the Christie Touch Panel Controller (TCP). THIS IS A RISKY PROCEDURE AND SHOULD ONLY BE ATTEMPTED BY EXPERIENCED TECHNICIANS. PROCEED AT YOUR OWN RISK. Christie TCP Battery ReplacementChristie S2 Projector ICP Battery Replacement
The linked article provides instructions for changing the ICP board battery in a Christie projector