Darco/Odyssey Products Model TM1-HD-B Booth Sound Monitor with HD15 “Data Port” Outputs
TM-HDBM-B Add-On HD15 Biamped Backboard Module for TM-Series Monitors
The TM-HDBM-B is an add-on module for Odyssey TM-series monitors. It provides signal routing from
processors with passive (full-range), or bi-amplified crossover outputs, to HD15 “Data Port” connectors.
* This backboard PASSIVELY routes the sound from the processor and/or crossover directly to the
amplifiers, without any signal processing. It will still pass signals even if the main monitor is powered off.
* The backboard receives the amplifier returns, and boosts their levels for audio monitoring by the main
TM unit.
Related Articles
Darco/Odyssey Products Model 16RJ-7.1-DSDY-RCA - Dual RJ45-to-DB25 converter with 7.1 surround routing
Odyssey Products Model 16RJ-7.1-DSDY-RCA Dual RJ45-to-DB25 converter with 7.1 surround routing, and HI/VI breakout RCA connector. This board is installed at the cinema processor, and performs the following functions: • It routes the digital AES audio ...Darco/Odyssey Products Model 16RJ-7.1-DSDY-RJ - Dual RJ45-to-DB25 converter with 7.1 surround routing
Odyssey Products Model 16RJ-7.1-DSDY-RJ Dual RJ45-to-DB25 converter with 7.1 surround routing, and HI/VI breakout RJ45 connector. This board is installed at the cinema processor, and performs the following functions: • It routes the digital AES audio ...Darco/Odyssey Products Model 950-OUT/16 and 950-OUT/8
950-OUT/16 Terminal Board for CP950 Analog Outputs The Model 950-OUT/16 and 950-OUT/8 terminal boards provide pluggable screw terminals for the analog output channels of the CP950 processor. The 950-OUT/16 accesses all 16 output channels, while the ...Darco/Odyssey Products Model DI6-3-KIT/THX Drive-In Mixer Kit
Click here for the manual for the above product The 016-3-KIT/THX is designed to route the analog outputs of most modern cinema processors, to stereo FM transmitters. This kit contains the main 016-3 passive mixer, input and output cables, and rubber ...Darco/Odyssey Products Model ODY-D2A-R2 Analog to Digital Audio Converter
Introduction: This Digital-To-Analog Audio Converter is designed for either home or professional audio applications. It converts Coaxial or Toslink digital audio signals to analog Left/Right audio, available via standard RCA jacks. The input supports ...