Dolby DSS200/CAT862 Image Issues With Mission: Impossible – Dead Reckoning

Dolby DSS200s attempting to play the original 4K DCP of Mission: Impossible – Dead Reckoning Part One will encounter image ghosting and playback errors. This is due to a decoding issue as shown in dolby log analyzer below.

Running the log analyzer will also confirm the incompatibility of the DCP Version. 

 A 2K version has been released that will provide proper playback on DSS200 server.

• Related Articles

• Dolby DSS-200 Power Switch for Hard Reboot

  The Dolby DSS digital cinema server was designed deliberately without a front panel power switch.  This was done by design to prevent accidental turn-off during a presentation.  There are times, however, when a full power cycle is needed to clear a ...

• Dolby DSS 200 Manual

  Here's a link to the Dolby DSS200/DSS220 Manual

• Dolby DSS100/DSP100 Manaul

  Click on the link below for the Dolby DSS100-DSP100 manual Dolby DSS100-DSP100 Manual

• Dolby DSS Server not keeping proper time

  The Dolby server synchronizes with a NTP server (master time clock) when it boots up. If a server is left on for an extended period the time clock will drift. We suggest a weekly reboot of the server. This will synchronize the clock to the correct ...

• Dolby Digital Cinema Power Maintenance Recommendations v1 1

  Dolby Labs has issued a bulletin regarding the long term shutdown of their cinema equipment.  The Dolby bulletin is here: Dolby Digital Cinema Power Maintenance Recommendations V1.1