Cinergy appliance not appearing on network
Network cable was plugged into the incorrect ETH jack. It plugs into the jack next to the headphone jack. Unit must be power cycled when changing ETH ports.
Related Articles
GDC Server not displaying random content on a DCDC/Deluxe QNAP or FilmVault delivery device
A random glitch has been observed in certain GDC servers. This affects both the SR-1000 and SX-2xxx series of servers. This problem does not appear if the content is being downloaded through a TMS. Content delivered by DCDC or Deluxe to terrestrial ...Touch Panel Controller (TCP) appears dead. Projector is on but cannot be controlled via TPC or net
Christie xenon cinema projectors have three separate power supplies; the lamp power supply (LPS), the low voltage power supply (LVPS) and the standby supply. The standby supply provides power to the touch panel controller (TPC) and the network ...Exhibitor Self-Installation Instructions-2Bay-QNAP
Self-Installation Instructions Unbox server and inspect for any damage during shipping. On the back of the server are three network ports (see below image for reference). The top left port connects to your ‘media’ network. This will be the network ...Doremi Maintenance Program Notification Pop Up
Skip to Main Content Doremi Maintenance Program Notification Pop Up Feb 18, 2021•Knowledge Question This article applies to DCP2000, DCP-2K4, ShowVault, IMS1000, IMS2000 and IMS3000. What is the Maintenance Program notification pop-up regarding? ...Projection Equipment IP Addressing Schema
While there is no true digital cinema IP addressing standard, there is a very popular one that was used by many theatres, including those on the Strong and Christie NOC's (Network Operation Centers), as well as some that were installed as ...